Fitted Burton for iPhone 4S/4
Show off your style on or off the slopes with these original Burton designs on sweet Speck cases.
What does it all mean, man?
A Speck Iconology Primer
Protection: it’s what you want in a case, and we take it seriously. All Speck cases are made from premium materials that are both flexible and durable, providing mighty protection from nicks, scratches, and the destructive force of gravity.
Our fabric-backed cases have a stylish look and a soft, tactile feel.
Burton adds their one-of-a-kind patterns and style to our fitted case for iPhone 4S. This cool two-piece hard shell fitted iPhone 4 cover snaps securely onto your phone for ultimate protection. The cozy design makes it a comfortable iPhone accessory to hold, with a matte soft-touch coating on the sides and tactile fabric on the back.
A raised bezel extends just beyond the edge of the screen, helping to protect your phone, even if it lands face down.
- Fitted Burton case fits all iPhone 4S and 4!
- Fabric-backed hard shell construction
- Original Burton fabric patterns updated seasonally
- Form-fit, two-piece, hard-shell fitted iPhone 4 case
- Raised screen bezel
Do you have this product?
Other customer reviews
Not too shabby
posted by Steven on 1/14/13
Price Value QualityI got the mascot texture plaid case. Awesome case and I love it. However, the back is fabric, and you may not know that, sometimes, your hands get dirty/dusty/sweaty and that will rub off on the case and it's hard to clean! My suggestion: Find a dark one that hides dirt well, like my next one, the red and black plaid (:
Love the case <3
posted by Andrew on 8/29/12
Price Value QualityWas in your store and bougth two of them! I love them <3 <3 <3
Really nice <3 :)
posted by Jeff on 8/18/12
Value Quality PriceAwesome case. Really really tough to get off, so that means it shouldn't just pop off if the phone gets bumped or dropped. It's a little pricey, but the the quality is amazing. Get this case when you can.
Fabric glue loosens up on a hot day.
posted by William Macaluso on 7/25/12
Value Quality PriceI put my hand in my pocket to get my phone because I had a message, but my hand as well as the face of the phone was covered in sticky glue from the backside of the case. I can't believe something as simple as a hot day can loosen the hold of the fabric. I am very disappointed about that, otherwise the case did its job I guess. To those of you concerned, the phone fit quite well in the case too.
Great... for me
posted by Courtney on 7/23/12
Value Quality PriceI got the Amethyst Bias Plaid case about 7 months and it has been very reliable. The Burton logo has just started to wear down and lose its color. The words BURTON x SPECK started to wear within a few days of receiving it but it is still there, nonetheless! Oh, and it is quite hard to remove from your phone but I guess that comes with the guarantee of protection of your phone!
Over the course of the seven months, I've heard people say that the fabric has came off of theirs.
BUT IT DOESN'T ALWAYS PEEL OFF!
Overpriced for the robustness
posted by Dan on 5/17/12
Value Quality PriceI bought the case because I think it was looking good. The problem is that it last only for 6 month and now I need to buy a new one since the case is broken. I still don't know how this happen since I've never dropper my phone. Don't buy this case if you are looking for a durable solution.
posted by Matt on 4/26/12
Value Quality PriceIt is really nice quality, works well. just hard to get off
posted by Almost on 4/26/12
Value Quality PriceI have the squarish one. I buy the squarish one so I can set it for taking photos.
The volume buttons get in the way, and the appliqué label on the other side makes it wobbly too.
I scratched off all the labels, but wish it had a large hole for the rotation lock and volume controls.
Overpriced and poor quality
posted by Stuart Moutrie on 4/12/12
Value Quality PriceEmbarrassed to admit I spent $40 on this case at my local Best Buy. Big fan of Burton; case seemed cool and sturdy. Dropped my phone ONCE on a kitchen floor (from only a foot or two) and cracked upper third of the front glass on phone. Shortly thereafter, noticed a crack in the actual case at the top of the phone, and then another on the lower right side. Used scotch tape as a minor remedy, but then today, an entire piece of the right side cracked and broke off. I take pretty good care of my phone - have had the same iPhone 4 since June of 2010, but this case has been a bit of a disaster. Could never recommend it, other than for aesthetics.
Don't buy fitted
posted by leliz on 4/10/12
Value Quality PriceBroke within a week of using; attractive case but I do not recommend the fitted style- get it all in one piece instead (fabshell).
How do I get the Fitted iPhone 4S/4 case off?
To remove this fitted iPhone 4 case, face the phone with the screen towards you. Start on the right side of the case, about an inch down from the top. From the inside (over the screen, not the outside!) gently pop the front of the case up. Once you have a bit of separation of the two pieces on the right side, work around to the top next, then to the left side and bottom, and gently pull the two pieces apart. It is much easier if you start from the inside/screen side, than from the outside of the fitted iPhone 4 cover! Use your fingers, or gently use a guitar pick or credit card to help pop it off. The trick is to start from the inside (screen side) - and it works best if you start on the right side and go counter-clockwise. For more help, please watch our fantastic demonstration video!
Q: Will the Fitted case fit my iPhone 4S/4?
A: Yes! Our Fitted has been measured to have a precise form-fit to the iPhone 4S/4. Our form-fit Fitted is designed to maintain its precision-fit over time.
Q: Can I use all the features of my iPhone 4S/4 without removing the Fitted case?
A: Yes! We've designed the Fitted to have cut-outs for all the iPhone 4S/4's buttons, lenses, speakers, ports, and sensors.
Q: Is this case "dockable" like the CandyShell Flip case?
A: No, however it is cutout around the plug connector, so you can plug it in without removing the case.
Q: Does this fitted iPhone 4 case come with a belt clip?
A: Fitted does not come with a belt clip or holster.
Q: Does Speck make iPhone 4S/4 screen films or protectors that will work with this case?
A: Yes! Our ShieldView screen protectors for iPhone 4S/4 are made of cutting-edge low-tack materials, protect from scratches and smudges, and are easy to apply/remove. We also include one bonus back film!
Q: Is the screen protected?
A: The raised front bezel helps protect your screen from coming in contact with other surfaces that might scratch it. If you’d like a screen film that protects your entire screen, check out our totally awesome ShieldView screen films.
Q: What is the Fitted Case made of?
A: This fitted iPhone 4 case's construction is a precisely molded 2-piece hard shell case. The hard shell is coated with matte, soft-touch coating. The back of the case is wrapped with tactile, stylin fabric, in original spexy patterns.
Q: Is the screen protected?
A: The raised front bezel helps protect your screen from coming in contact with other surfaces that might scratch it.
Q: What is the finish on the outside of the Fitted?
A: Fitted has a soft-touch anti-scratch hard plastic finish that is wrapped in tactile patterns for a fabric-backed comfort grip.
Q: Can I be notified if a color or item is out of stock?
A: Sure! Just go to the page for the product style and color you want and hit the “Out of Stock? NOTIFY ME” button.
Q: You haven't answered my question.
A: Please email us! For questions about an order you have placed or other general questions, please email email@example.com.