Fitted
Because Dressing Up is Fun!
For iPad
It feels really good, this case does. And it looks good, too. Sleek, stylish, a hint of sophistication and smarts; this hard-shell case with matte soft-touch coating becomes even more impressive if you match the fabric-wrapped back to your outfit, scarf, or tie.
- Fabric-wrapped hard shell case gives a fabulous tailored look
- Original fabric patterns on a form-fit two-piece hard shell
- Soft-touch matte coating on case shell
- Access to all buttons, controls and 30 pin connector while in the case
- Place your iPad into the back half of the case, making sure you have it set the right way (check the headphone plug and 30-pin connector for alignment with the cutouts). Place the front of the case on top, again, checking for alignment to make sure you have it the right way. Start at one corner, and snap the two pieces together, going all the way around the edges till the two pieces are firmly seated together on all sides.
To remove the Fitted iPad case, start at the button cutout on the side, and gently pull the top half away from the bottom half. Working your way around to the corners, un-snap all the way around until the two pieces are completely separated.
-
Length: 0.71 inches
-
Width: 7.7 inches
-
Height: 9.79 inches
-
Weight: 9.6 oz.
-
Colors: Houndstooth Gray, Fadeaway Gray/Black/Green, Fadeaway Gray/Black/Pink, ClassicPlaid Pink & Gray, Black & White Plaid
-
SKUS: IPAD-FTD-A02A002, IPAD-FTD-A02A018, IPAD-FTD-A02A019, IPAD-FTD-A02A020, IPAD-FTD-A02A012
- How do I get the Fitted iPad case on and off?
To put it on, place your iPad into the back half of the case, making sure you have it set the right way (check the headphone plug and 30-pin connector for alignment with the cutouts). Place the front of the case on top, again, checking for alignment to make sure you have it the right way. Start at one corner, and snap the two pieces together, going all the way around the edges till the two pieces are firmly seated together on all sides.
To remove the Fitted iPad case, start at the button cutout on the side, and gently pull the top half away from the bottom half. Working your way around to the corners, un-snap all the way around until the two pieces are completely separated.
- What is the Fitted Case made of?
This case's construction is a precisely molded 2-piece hard shell case. The hard shell is coated with matte, soft-touch coating. The back of the case is wrapped with tactile, stylin fabric, in original spexy patterns.
- Is this case "dockable" like the CandyShell iPad case?
No, however it is cutout around the plug connector, so you can plug it in without removing the case, however it does not allow for docking.
- Is the screen protected?
The raised front bezel helps protect your screen from coming in contact with other surfaces that might scratch it. If you’d like a screen film that protects your entire screen, our totally awesome ShieldView screen films for iPad are available here.
IPAD-FTD-A02A002 IPAD-FTD-A02A018 IPAD-FTD-A02A019 IPAD-FTD-A02A020 IPAD-FTD-A02A012
REVIEW: Geardiary.com is the first to give their two cents on Fitted for iPad!
REVIEW: Beatweek Mag gives the low down on Fitted for iPad!
REVIEW: Fitted for iPhone exceeded TouchGen's expectations!
